20x25m Used Marquee Tents for Sale

A marquee tent at 20x25m gives 500 square meters of column-free floor, enough for a 400-guest dinner or a 600-person reception. Buying used rather than new cuts the entry cost while keeping the same aluminum frame and PVC cover spec, which is why event companies and venues stock these sizes for repeat use.

Span and Frame Specification

The 20m span uses a 256x121x5mm four-channel aluminum profile with a 4m eave height and a 7.2m ridge; the 25m span lifts the ridge to 8.0m on the same bay spacing of 5m. Both clear spans reach unlimited length by adding 5m bays. A large party tent of this type carries wind loads up to 80km/h as standard and can be reinforced, with a snow load around 15kg per square meter when the roof pitch is steep enough to shed snow.

Fabric and Materials

The frame is hard pressed extruded aluminum 6061/T6 with an anodized finish, and connectors are hot-dip galvanized steel over 80 microns. The cover is double PVC-coated polyester, fully waterproof, UV resistant, tear resistant, and fire retardant to DIN4102 B1, M2, and CFM. The fabric also self-cleans, so rain washes most dirt off between events without manual scrubbing.

Where a 20x25m Used Marquee Fits

These tents serve weddings, parties, exhibitions, festivals, cafe extensions, and sporting events. Because the frame is standardized, a used unit drops into the same layouts as a new one. For an outdoor party tent on grass, confirm the anchor set ships with the frame before you buy, since missing pegs delay the build.

Optional Accessories

Used frames accept colorful or transparent covers, glass walls, PVC hard walls, sandwich panel walls, and clear or mesh windows. Doors range from glass swing units to rolling shutters. Gutters link two tents so guests move between them dry, and wooden flooring, lining, lighting, and climate control all clip to the frame channels. Review party tent lining to see how a lined interior changes the look of a used frame.

Fixing Methods by Surface

Soft ground such as earth, sand, or lawn takes steel peg anchors. Hard surfaces like cement or stone take inflatable screws, and protected floors such as marble, tile, asphalt, or brick take weight plates so the surface is never drilled. Pick the method before delivery so the crew arrives with the right kit. Confirm the count against the bay total so no section sits unanchored on a windy night. Each method is rated to a wind load, so match it to the local exposure rather than the lowest-cost hardware. Stock of this size sells fast, so reserve a frame as soon as the date is set.

Inspection Before You Buy

Request photos of the actual frame from every angle, not a catalog shot. Look for white corrosion at joints, bent rafters, and missing base plates, because those drive the real cost after purchase. Unroll the fabric in daylight to spot UV chalking and pinholes, and confirm the fire label is current. A clean frame with tired fabric is an easy win; a tired frame is a money pit that no cheap price offsets. Ask the seller for the original spec so you can price spares and confirm the frame matches current accessory catalogs.

New vs Used Marquee

A used 20x25m marquee costs far less than a new one while keeping the same 6061/T6 frame and B1/M2 fabric spec, so the structure performs to the same standard. The trade-off is cosmetic wear and possibly a fabric near end of life, both easy to budget for. Buy used when you host several events a year, and reserve new frames for flagship builds where a pristine cover matters most. Either way, keep the fire certificate current, because some venues reject a cover past its retest date regardless of frame condition.

Frequently Asked Questions

What sizing comes with a 20x25m used marquee?
The 20m span has a 4m eave and 7.2m ridge; the 25m span has an 8.0m ridge, both on 5m bays and a 256x121x5mm frame. Length extends in 5m steps, so the footprint grows to fit the guest list.

How do I check a used marquee before buying?
Inspect the frame for corrosion at joints, confirm all connectors and base plates ship, and unroll the fabric in daylight for UV chalking or pinholes. A right tent size only helps if the frame is sound, so verify the spec matches your site.

Can a used marquee pass venue fire codes?
Yes, if the fabric still carries a valid B1/M2 certificate. Ask the seller for the current test label, because fire retardancy decays with sun exposure and must be re-certified for some venues.

How are used marquee tents anchored?
By surface: pegs for soft ground, screws for hard ground, weight plates for protected floors. The method is specced to local soil, and the supplier should include the rated hardware with the frame.

→ Browse Industrial Tent Suppliers